top of page

LEXAN™ THERMOCLEAR™ PLUS 8 mm 2 Wall Rectangular Polycarbonate

Lexan™ Polycarbonate Sheet & Film

Coated UV Resistant, Durable & Lightweight@1.5 kg/m² Multi Wall Sheet

LEXAN THERMOCLEAR PLUS 8 mm 2 Wall Rectangular Sheet

LEXAN™ THERMOCLEAR™ PLUS 8 mm is a Twin-Wall Polycarbonate Multi-Wall Sheet.

It is Lightweight with only 1.5 kg/m². Meeting ASTM E84 Class A ( or ASTM E84-08 ), NFPA No 255 (National Fire Protection Association ANSI/NFPA No 101 ) and UL723

The Advanced LEXAN™ THERMOCLEAR™ PLUS LT2UV82RS15 Twin-Wall offers U Value of 3.26 W/m² K.

U-Value is a Measurement of Heat Transfer. It is Expressed in W/m² Kelvin.
It Calculates the Amount of Heat Transfer in Watts (W) per meter Square

The Lower the U Value, The Lesser the Heat Transfer Through the Multi-Wall Sheet or Known as Heat Insulation/ Lesser Heat

A Clear LEXAN™ THERMOCLEAR™ PLUS 8 mm allow 81% Light Transmission
It Features a Advanced 2 side Proprietary Surface Coating Designed to Protect the Sheet against the Degrading Effects of Ultra-Violet Radiation & Acid Rain in Outdoor Weather.

The 2 Side Coating Help Ensure Long-Term High Light Transmission against Outdoor Weathering and Minimize Installation Mistake Costs.

LEXAN™ THERMOCLEAR™ PLUS offer Diffuser Visual Effect & Hides those Annoying Dust or Dirt while allowing Natural Daylight to Pass Through. It also offer High Stiffness & Flat when Installed. Please refer to the Technical Guide for Wind Load Calculation

This Multi-Wall Sheet also Reduces Glare from the Sun Light & Does Not Produce Magnifying Glass Effect from Clear Glass or Solid Polycarbonate Sheet

As a Barrier, LEXAN™ THERMOCLEAR™ PLUS 8 mm will Result by 17 dB Sound Reduction

Standard LEXAN™ THERMOCLEAR™ Color: Clear - 112, Opal White - WH7A092X, Bronze - 515055

New LEXAN™ THERMOCLEAR™ Polycarbonate now with Limited 20 years Warranty

Contact us for more Details

8 mm Thermoclear Suggested Structure Size is 1100 mm x 1650 mm

The Calculation Applied to Maximum Building Height Up to 8 meters ( 26.25 feet)
Wind Loading based on 600 N/m², Maximum Strong Wind & Near Storm Level

Size of Metal Structure, Supporting 4 Side

= 1100 mm width x 1650 mm length.

The Above is the Maximum Size & No Sagging / Wavy Appearance
The 8 mm Twin-Wall Polycarbonate Sheet Remain Flat

If The Structural Size goes Beyond the Recommended Size, The Multi Wall Polycarbonate Sheet Will Sag & Wind Loading will Fail

Important Accessories

a) Advanced Anti Dust Tape:
- to Allow Condensation Water to Flow Out
- Prevent Dust or Insects from Entering the MWS
- thus No Algae or Moss will Grow
b) Custom Design Anti Dust Tape Capping to Protect & Prolong the Life of Anti Dust Tape. Available in Malaysia
- PSP10 ( for 10 mm MWS )
- PSP16 ( for 16 mm MWS )
c) Weatherable Tape, to Prevent Water Sipping into the Anti Dust Tape Capping
d) Custom Design PSP501 Clamping. Width Designed for Good Clamping
e) Custom Design PSP502 / 504 Cover Clamping.
- Cover of Assembly Screws for Aesthetic
- Reduce Water Sipping through Screw Holes
f) Custom Design PSP503 Rubber Profile. Long-Lasting Rubber for Clamping MWS
g) Custom Design PSP510 Clamping Cover, Aesthetic & Stop Insect Entering the PSP-501 Clamping

LEXAN™ THERMOCLEAR™ Sheet passed B-s1,d0 against EN-13501-1

LEXAN THERMOCLEAR PLUS 8 mm Twin-Wall Width Availability for Project

1,050 mm
1,250 mm
2,100 mm

8 mm Twin-Wall Stocks Stocks Available in Thailand. Clear - 112

bottom of page