LEXAN™ THERMOCLEAR™ Dripgard 10 mm 5 Wall Rectangular Polycarbonate
Advanced Greehouse Material. Lightweight@ 1.75 kg/m² Multi Wall Sheet
LEXAN™ THERMOCLEAR™ Dripgard 10 mm is a 5 Wall Polycarbonate Multi-Wall Sheet.
The Sheet has an Unique Proprietary Hydrophilic Coating which Reduces the Contact Angle
of Condensation Droplets
• Light Transmission is Not Blocked by Condensation Droplets
• Helps Prevent Dripping of Water Droplets onto Crops/Plants in your Greenhouse
• 1 Side UV protection
• High Light Transmission with 100% Diffusion using Softlite Material from SABIC to Improved Growth & Output
• Meets Building Codes D635 CC1 and E84 Class A
It is Lightweight with only 1.75 kg/m².
The Advanced LEXAN™ THERMOCLEAR™ Dripgard LTD105R175 5 Wall offers U Value of 2.48 W/m² K.
U-Value is a Measurement of Heat Transfer. It is Expressed in W/m² Kelvin.
It Calculates the Amount of Heat Transfer in Watts (W) per meter Square
The Lower the U Value, The Lesser the Heat Transfer Through the Multi-Wall Sheet or Known as Heat Insulation/ Lesser Heat
A Clear LEXAN™ THERMOCLEAR™ Dripgard 10 mm allow 65% Light Transmission
It Features a Advanced 2 side Proprietary Surface Coating Designed to Protect the Sheet against the Degrading Effects of Ultra-Violet Radiation & Acid Rain in Outdoor Weather.
The 2 Side Coating Help Ensure Long-Term High Light Transmission against Outdoor Weathering and Minimize Installation Mistake Costs.
LEXAN™ THERMOCLEAR™ Dripgard offer Diffuser Visual Effect & Hides those Annoying Dust or Dirt while allowing Natural Daylight to Pass Through. It also offer High Stiffness & Flat when Installed. Please refer to the Technical Guide for Wind Load Calculation
This Multi-Wall Sheet also Reduces Glare from the Sun Light & Does Not Produce Magnifying Glass Effect from Clear Glass or Solid Polycarbonate Sheet
As a Barrier, LEXAN™ THERMOCLEAR™ Dripgard 10 mm will Result by 19 dB Sound Reduction
Standard LEXAN™ THERMOCLEAR™ Color: Clear - 112, Softlite - SOFT, Opal White - WH7A092X, Bronze - 515055
10 mm Thermoclear Suggested Structure Size is 1200 mm x 1800 mm
The Calculation Applied to Maximum Building Height Up to 8 meters ( 26.25 feet)
Wind Loading based on 600 N/m², Maximum Strong Wind & Near Storm Level
Size of Metal Structure, Supporting 4 Side
= 1200 mm width x 1800 mm length.
The Above is the Maximum Size & No Sagging / Wavy Appearance
The 10 mm 5 Wall Polycarbonate Sheet Remain Flat
If The Structural Size goes Beyond the Recommended Size, The Multi Wall Polycarbonate Sheet Will Sag & Wind Loading will Fail
a) Advanced Anti Dust Tape:
- to Allow Condensation Water to Flow Out
- Prevent Dust or Insects from Entering the MWS
- thus No Algae or Moss will Grow
b) Custom Design Anti Dust Tape Capping to Protect & Prolong the Life of Anti Dust Tape. Available in Malaysia
- PSP10 ( for 10 mm MWS )
- PSP16 ( for 16 mm MWS )
c) Weatherable Tape, to Prevent Water Sipping into the Anti Dust Tape Capping
d) Custom Design PSP501 Clamping. Width Designed for Good Clamping
e) Custom Design PSP502 / 504 Cover Clamping.
- Cover of Assembly Screws for Aesthetic
- Reduce Water Sipping through Screw Holes
f) Custom Design PSP503 Rubber Profile. Long-Lasting Rubber for Clamping MWS
g) Custom Design PSP510 Clamping Cover, Aesthetic & Stop Insect Entering the PSP-501 Clamping
LEXAN™ THERMOCLEAR™ Sheet passed B-s1,d0 against EN-13501-1
LEXAN THERMOCLEAR Dripgard 10 mm 5 Wall Width Availability for Project
10 mm 5 Wall Stocks Not Available. Contact Us for Project Requirement