top of page

LEXAN™ THERMOCLEAR™ PLUS SCIR 20 mm 5 Wall X-Structure Polycarbonate

Lexan™ Polycarbonate Sheet & Film

UV Resistant & Reduced Heat. Lightweight@3.2 kg/m² Multi Wall Sheet

LEXAN THERMOCLEAR SCIR 20 mm 5 Wall X-Structure Sheet

LEXAN™ THERMOCLEAR™ SCIR ( Solar Control Infra Red) 20 mm is a 5X Wall Polycarbonate Multi-Wall Sheet.

It is Lightweight with 3.2 kg/m² & has an Advanced Solar Control Infra Red Blocking Material Technology that Blocks More than 30% IR thus Reducing Low Solar Transmission.
Furthermore, The Material Technology will Assist in delaying the Heat Build Up Inside the Room or Building

LEXAN™ THERMOCLEAR™ SCIR 2UVIR205X32 5X Wall offers U Value of 1.69W/m² K.

U-Value is a Measurement of Heat Transfer. It is Expressed in W/m² Kelvin.
It Calculates the Amount of Heat Transfer in Watts (W) per meter Square

The Lower the U Value, The Lesser the Heat Transfer Through the Multi-Wall Sheet or Known as Heat Insulation/ Lesser Heat

A Natural Green LEXAN™ THERMOCLEAR™ SCIR 20 mm allows Approximately 41% Light Transmission
It Features a Unique Technology of 2 Side Proprietary Surface UV Resistance Coating, Developed to Protect the Sheet against the Degrading Effects of Ultra-Violet Radiation & Acid Rain in Outdoor Weather.

The 2 Side Coating Help Ensure Long-Term High Light Transmission against Outdoor Weathering and Minimize Installation Mistake Costs.

LEXAN™ THERMOCLEAR™ SCIR offers Diffuser Visual Effect & Hides those Annoying Dust or Dirt while allowing Natural Daylight to Pass-Through. It also offers High Stiffness & Flat when Installed. Please refer to the Technical Guide for Wind Load Calculation

This Multi-Wall Sheet also Reduces Glare from the Sun Light & Does Not Produce Magnifying Glass Effect from Clear Glass or Solid Polycarbonate Sheet

Standard Color Available, SCIR Natural Green: GN8B038T
Custom Color, High MOQ for Project Basis: SCIR Dark Green, SCIR Grey & SCIR Blue

New LEXAN™ THERMOCLEAR™ Polycarbonate now with Limited 20 years Warranty

Contact us for more Details

20 mm Thermoclear Suggested Structure Size is 1490 mm x 2235 mm

The Calculation Applied to Maximum Building Height Up to 8 meters ( 26.25 feet)
Wind Loading based on 600 N/m², Maximum Strong Wind & Near Storm Level

Size of Metal Structure, Supporting 4 Side

= 1490 mm width x 2235 mm length.

The Above is the Maximum Size & No Sagging / Wavy Appearance
The 20 mm 5X Wall Polycarbonate Sheet Remain Flat

If The Structural Size goes Beyond the Recommended Size, The Multi Wall Polycarbonate Sheet Will Sag & Wind Loading will Fail

Important Accessories

a) Advanced Anti Dust Tape:
- to Allow Condensation Water to Flow Out
- Prevent Dust or Insects from Entering the MWS
- thus No Algae or Moss will Grow
b) Custom Design Anti Dust Tape Capping to Protect & Prolong the Life of Anti Dust Tape. Available in Malaysia
- PSP10 ( for 10 mm MWS )
- PSP16 ( for 16 mm MWS )
c) Weatherable Tape, to Prevent Water Sipping into the Anti Dust Tape Capping
d) Custom Design PSP501 Clamping. Width Designed for Good Clamping
e) Custom Design PSP502 / 504 Cover Clamping.
- Cover of Assembly Screws for Aesthetic
- Reduce Water Sipping through Screw Holes
f) Custom Design PSP503 Rubber Profile. Long-Lasting Rubber for Clamping MWS
g) Custom Design PSP510 Clamping Cover, Aesthetic & Stop Insect Entering the PSP-501 Clamping

LEXAN™ THERMOCLEAR™ Sheet passed B-s1,d0 against EN-13501-1

LEXAN THERMOCLEAR SCIR 20 mm 5X Wall Width Availability for Project

1,050 mm
1,250 mm
2,100 mm

Thermoclear SCIR 20 mm 5X Wall Stocks Not Available. Pre-Order for Project

bottom of page