LEXAN™ THERMOCLEAR™ PLUS SCIR 6 mm 2 Wall Rectangular Polycarbonate
UV Resistant & Reduced Heat. Lightweight@1.3 kg/m² Multi Wall Sheet
LEXAN™ THERMOCLEAR™ SCIR ( Solar Control Infra Red) 6 mm is a Twin-Wall Polycarbonate Multi-Wall Sheet. Meets ASTM E84 Class A
It is Lightweight with 1.3 kg/m² & has an Advanced Solar Control Infra Red Blocking Material Technology that Blocks More than 30% IR thus Reducing Low Solar Transmission.
Furthermore, The Material Technology will Assist in delaying the Heat Build Up Inside the Room or Building
LEXAN™ THERMOCLEAR™ SCIR 2UVIR62R13 Twin-Wall offers U Value of 3.56W/m² K.
U-Value is a Measurement of Heat Transfer. It is Expressed in W/m² Kelvin.
It Calculates the Amount of Heat Transfer in Watts (W) per meter Square
The Lower the U Value, The Lesser the Heat Transfer Through the Multi-Wall Sheet or Known as Heat Insulation/ Lesser Heat
A Natural Green LEXAN™ THERMOCLEAR™ SCIR 6 mm allows Approximately 66% Light Transmission
It Features a Unique Technology of 2 Side Proprietary Surface UV Resistance Coating, Developed to Protect the Sheet against the Degrading Effects of Ultra-Violet Radiation & Acid Rain in Outdoor Weather.
The 2 Side Coating Help Ensure Long-Term High Light Transmission against Outdoor Weathering and Minimize Installation Mistake Costs.
LEXAN™ THERMOCLEAR™ SCIR offers Diffuser Visual Effect & Hides those Annoying Dust or Dirt while allowing Natural Daylight to Pass-Through. It also offers High Stiffness & Flat when Installed. Please refer to the Technical Guide for Wind Load Calculation
This Multi-Wall Sheet also Reduces Glare from the Sun Light & Does Not Produce Magnifying Glass Effect from Clear Glass or Solid Polycarbonate Sheet
Standard Color Available, SCIR Natural Green: GN8B038T
Custom Color, High MOQ for Project Basis: SCIR Dark Green, SCIR Grey & SCIR Blue
New LEXAN™ THERMOCLEAR™ Polycarbonate now with Limited 20 years Warranty
Contact us for more Details
6 mm Thermoclear Suggested Structure Size is 920 mm x 1380 mm
The Calculation Applied to Maximum Building Height Up to 8 meters ( 26.25 feet)
Wind Loading based on 600 N/m², Maximum Strong Wind & Near Storm Level
Size of Metal Structure, Supporting 4 Side
= 920 mm width x 1380 mm length.
The Above is the Maximum Size & No Sagging / Wavy Appearance
The 6 mm Twin-Wall Polycarbonate Sheet Remain Flat
If The Structural Size goes Beyond the Recommended Size, The Multi Wall Polycarbonate Sheet Will Sag & Wind Loading will Fail
a) Advanced Anti Dust Tape:
- to Allow Condensation Water to Flow Out
- Prevent Dust or Insects from Entering the MWS
- thus No Algae or Moss will Grow
b) Custom Design Anti Dust Tape Capping to Protect & Prolong the Life of Anti Dust Tape. Available in Malaysia
- PSP10 ( for 10 mm MWS )
- PSP16 ( for 16 mm MWS )
c) Weatherable Tape, to Prevent Water Sipping into the Anti Dust Tape Capping
d) Custom Design PSP501 Clamping. Width Designed for Good Clamping
e) Custom Design PSP502 / 504 Cover Clamping.
- Cover of Assembly Screws for Aesthetic
- Reduce Water Sipping through Screw Holes
f) Custom Design PSP503 Rubber Profile. Long-Lasting Rubber for Clamping MWS
g) Custom Design PSP510 Clamping Cover, Aesthetic & Stop Insect Entering the PSP-501 Clamping
LEXAN™ THERMOCLEAR™ Sheet passed B-s1,d0 against EN-13501-1
LEXAN THERMOCLEAR SCIR 6 mm Twin-Wall Width Availability for Project